H-30 PEM Fuel Cell - 30W
When looking to procure fuel cell stacks for new product development, testing or system integration, you are likely to find the best possible value at Horizon Educational. We offer the widest range of standard “off-the-shelf” PEM fuel cell systems. Our standard systems are simple, efficient, and feature some of the highest power densities available in the world – opening new possibilities for university projects.
- Miniature electronic valve
- Control electronics
- Integrated fan and casing
- Low voltage protection
- 30W stack with blower
Fuel Cell Stack 30W
Additional Information
Like other entry-level fuel cell stacks, the H-30 can be purchased without any supporting components. However, Horizon Educational recommends contacting us to build an easy-to-use package in order to facilitate incorporation of the product into your project. Click here to fill out a quote request form if you would like to create a complete package that includes the fuel cell stack and required supporting components.
30W Fuel Cell and Hydrogen
Safety Requirements
Do not connect or disconnect power cables when the fuel cell stack is turned on. Warranty is void if the fuel cell stack is disassembled or otherwise altered. Hydrogen is a colorless, odorless, and flammable substance. Always operate and store the fuel cell stacks and hydrogen storage canisters in an area with ample ventilation. Fuel cell systems should always be equipped with a highly accurate hydrogen sensor to detect any leaking hydrogen within the system or from the hydrogen storage canister. Please refer to the H-30 User Manual to see a complete list of the safety requirements for the product.
Hydrogen Storage Tip
The best way to supply hydrogen to this fuel cell is using our Hydrostik Pro! Hydrostiks are a great way to store hydrogen safely and economically, and the best part is that they can be filled using our HydroFill Pro electrolyzer! Our electrolyzer is able to extract a large amount of hydrogen from a small amount of de-ionized or distilled water.
Fuel Cell Stack 30W Quick Product Facts
Number of Cells
This fuel cell stack is composed of 14 fuel cells.
Hydrogen Pressure
Hydrogen must be fed into the fuel cell stack at a pressure of 0.45-0.55 Bar.
Ambient Temperature
The fuel cell stack operates best in a temperature ranging from 41 to 86° F / 5-30° C.
FC Stack Weight
This stack (including fan and casing) weighs 0.62lb / 280g.
System Efficiency
At full power the efficiency of the system is 40%.
Humidification
This fuel cell stack uses self-humidification.
H-30
Performance: 8.4V @ 3.6A
Hydrogen consumption at rated power: 0.42l/min.
Stack dimensions: 8.0 x 4.7 x 7.5cm
List of H-30 components:
1 x 30W fuel cell stack
1 x controller
1 x silicon tube (OD 4 x ID 2.5mm), 50cm long
1 x filter
2 x red plastic pin
1 x valve
4 x inlet/outlet gas fitting (M3-4)
